Chameleon-labs 7602 MKII X-Mod Manuel d'utilisateur

Chameleon Labs Model 7602 MKIIMicrophone Preamplifier and Equalizer Owner’s Manual704 228thAvenue NE, # 826Sammamish, WA 98074206-264-7602www.chameleo

First time users Set up of the Model 7602 MKII 1- Select 40 dB on the Microphone / Line sensitivity control. Turn the Output control fully counter cl

4- Turn the Output control clockwise until you can see level on the input of your recorder. Increase until the desired level is achieved. (Vintage Hin

9- When the optional CPS-1 is used the POWER switch is inoperative and the power is controlled by the switch on the CPS-1. 12

Warranty and Liability Your Chameleon Labs product is warranted to the original owner for a period of one year. Chameleon Labs guarantees this produ

MODEL NUMBER ___________________________ SERIAL NUMBER ____________________________ DATE OF PURCHASE __________________________ PURCHASED FROM _

-46dBu with final output stage at unity EIN -126 dBu; -56dBu without final output stage EIN -136 dBu. Controls either “flat” or switched out. Output:

Your Model 7602 MKII microphone preamplifier has a transformer balanced input with a range between 20dB and 80dB of gain. The separate line input is

Features of the Model 7602 MKII: • Fully balanced transformer mic input and output; • Balanced XLR outputs; • Hi-Z direct inputs for instrum

Front Panel Controls: (Left to Right) Switch general rule: When the switch is moved toward the function label, the feature is selected. Power- This

5dB steps, and the line section provides +10 to -20dB of adjustment. EQ Switch- This switch turns the equalizer section on. Ø Switch- This switch r

Mid Equalization - This section has a peaking characteristic with six frequency selections: 360Hz, 700Hz, 1.6k, 3.2k, 4.8k, and 7.2k. The gain cont

Connecting the Preamplifier / Equalizer Audio Connection Microphone input connections are made with the female XLR connector on the rear of the unit.

Power Supply Connection The unit is supplied with a country - correct AC adapter. All DC conversion, regulation and filtering is done within the 7602

possible that the plug is misaligned and should be rotated for a correct fit. DO NOT FORCE the power connector. The power pin is wired as follows: Pi